Showing posts with label update. Show all posts
Showing posts with label update. Show all posts
Monday, October 6, 2014
P7500XWKK4 Android 3 2 Honeycomb Firmware Update for Samsung Galaxy Tab 10 1 3G P7500 leaks
The Android 3.2 Honeycomb firmware for Samsung Galaxy Tab 10.1 3G P7500 leaked. This is the first Android 3.2 firmware update for Galaxy Tab 10.1 3G that has been available online. The firmware build number is P7500XWKK4 with a build date as of November 11,2011. The stock ROm comes with a SEB CSC file which is for European versions of SGS Tab P7500 3G version. Some advance users already tried flashing this ROM and says it’s a little bit faster than the previous P7500XXKI1 and P7500XXKI2..
Anyway, we spotted this ROM a while ago on Kies server but unfortunately being pulled out by Samsung with no reasons, the devs might be still working for progress. So, if you want to try it out, the Odin flashable stock ROM is now available, remember this is a leak version and maybe available officially released sooner.
Languages included:
Cestina
Dansk
Deutsch
Espanol
English
Estonian
French
Hrvatski
Icelandic
Italian
Latviesu
Lietuviu
Magyar
Nederlands
Norsk bokmal
Polski
Portugues
Romana
Slovencina
Slovescina
Suomi
Svenska
Turkce
Greek
Grab the P7500XWKK4 Android 3.2 Honeycomb Stock ROM from here:
P7500XWKK4_P7500OXXKK3_P7500XXKK2_HOME.tar.md5
http://www.filefat.com/j8y5lu1ho7gb
http://www.multiupload.com/U0OSU20ABD
Pass: sampro.pl
Thanks to: Przekret at XDA
A CWM flashable stock ROM is posted by pkoper here:
P7500XWKK4 CWM flashable stock rom
Languages included:
Cestina
Dansk
Deutsch
Espanol
English
Estonian
French
Hrvatski
Icelandic
Italian
Latviesu
Lietuviu
Magyar
Nederlands
Norsk bokmal
Polski
Portugues
Romana
Slovencina
Slovescina
Suomi
Svenska
Turkce
Greek
Grab the P7500XWKK4 Android 3.2 Honeycomb Stock ROM from here:
P7500XWKK4_P7500OXXKK3_P7500XXKK2_HOME.tar.md5
http://www.filefat.com/j8y5lu1ho7gb
http://www.multiupload.com/U0OSU20ABD
Pass: sampro.pl
Thanks to: Przekret at XDA
A CWM flashable stock ROM is posted by pkoper here:
P7500XWKK4 CWM flashable stock rom
Monday, September 1, 2014
How to Manually Upgrade via ODIN Sprint Samsung Galaxy Tab to 2 3 4 Gigerbread Update
Some of Sprints Samsung Galaxy Tab users experiencing an update error like attempting the "Update Firmware" but the Tab stays busy for a minute and then eventually stops with the following error message:
"The Firmware update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service".
"Error: Connection Error"
and or when attempting the "Update Android" it will only shows: "Your system is currently up to date."
Others may also having trouble updating it via WI-FI since many users having a wi-fi only version, and can only updated via 3G while the WI-Fi is turned Off. So, it needs to turn off wifi, and use 3G to get the update.
This is originally posted by ktran1588 over XDA for some reason and a solution to those who are having trouble updating their Sprint Samsung Galaxy Tabs. This is also an option to those who bought a refurbished Sprint Galaxy Tabs that has a WiFi only version.
Warning: You will lose root on the tab, and there is not a solution to root Gingerbread yet...
Does applying it cause you to lose any apps or files on the tab? Make a back-up copy of all important files before proceeding.
First you have to have stock EB28 on the tab prior to the update.
Check the software version on your phone:
1. From the Home screen, press Menu, then tap Settings
2. Flick up to scroll down, then tap About Phone
3. Software version is displayed under Baseband Version
4. Galaxy Tab shows like the following information:
Hardware version SPH-P100.08
Model number SPH-P100
Firmware version 2.2
Baseband Version S:P100.08 S.EB28
Kernel version 2.6.32.9
Build number SPH-P100.DJ30
If tour device firmware is not yet on EB28 follow these guide:
1. Download the E24 flasher
2. Find a copy of Odin (1.3 worked for me)
3. Extract the flasher, look in ModelsBinary, strip the .MD5 extension from the file SPH-P100.EA24.SECURE.REV07-FULL_CL871413.tar.md5
4. Load Odin
5. Connect device via USB
6. Reboot into recovery (power off, hold power and down volume keys or do a "adb reboot download")
7. Select the newly renamed .TAR file in the PDA slot in Odin
8. Select start (flashing should commence)
9. Boot, then you will be prompt for EB28 update, allow the EB28 update to complete
Then follow these step to update to Gingerbread:
1. Download the Gingerbread update (Special thanks to pvtjoker42 for this. Source)
2. Copy the update_from_EB28_to_EF17.zip file to the root of your SD card, rename it to update.zip
3. Reboot into recovery (power off, hold power and up volume keys or do a "adb reboot recovery")
4. Use volume rocker to select apply update.zip (or whatever)
5. Touch the home button to select
NOTE: If you got stuck during the update, try to reformat the sd card with your tab or use a different one, then try again.
Read the full procedure originally posted at XDAs thread here:
http://forum.xda-developers.com/showthread.php?t=1156605
"The Firmware update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service".
"Error: Connection Error"
and or when attempting the "Update Android" it will only shows: "Your system is currently up to date."
Others may also having trouble updating it via WI-FI since many users having a wi-fi only version, and can only updated via 3G while the WI-Fi is turned Off. So, it needs to turn off wifi, and use 3G to get the update.
This is originally posted by ktran1588 over XDA for some reason and a solution to those who are having trouble updating their Sprint Samsung Galaxy Tabs. This is also an option to those who bought a refurbished Sprint Galaxy Tabs that has a WiFi only version.
Warning: You will lose root on the tab, and there is not a solution to root Gingerbread yet...
Does applying it cause you to lose any apps or files on the tab? Make a back-up copy of all important files before proceeding.
First you have to have stock EB28 on the tab prior to the update.
Check the software version on your phone:
1. From the Home screen, press Menu, then tap Settings
2. Flick up to scroll down, then tap About Phone
3. Software version is displayed under Baseband Version
4. Galaxy Tab shows like the following information:
Hardware version SPH-P100.08
Model number SPH-P100
Firmware version 2.2
Baseband Version S:P100.08 S.EB28
Kernel version 2.6.32.9
Build number SPH-P100.DJ30
If tour device firmware is not yet on EB28 follow these guide:
1. Download the E24 flasher
2. Find a copy of Odin (1.3 worked for me)
3. Extract the flasher, look in ModelsBinary, strip the .MD5 extension from the file SPH-P100.EA24.SECURE.REV07-FULL_CL871413.tar.md5
4. Load Odin
5. Connect device via USB
6. Reboot into recovery (power off, hold power and down volume keys or do a "adb reboot download")
7. Select the newly renamed .TAR file in the PDA slot in Odin
8. Select start (flashing should commence)
9. Boot, then you will be prompt for EB28 update, allow the EB28 update to complete
Then follow these step to update to Gingerbread:
1. Download the Gingerbread update (Special thanks to pvtjoker42 for this. Source)
2. Copy the update_from_EB28_to_EF17.zip file to the root of your SD card, rename it to update.zip
3. Reboot into recovery (power off, hold power and up volume keys or do a "adb reboot recovery")
4. Use volume rocker to select apply update.zip (or whatever)
5. Touch the home button to select
NOTE: If you got stuck during the update, try to reformat the sd card with your tab or use a different one, then try again.
Read the full procedure originally posted at XDAs thread here:
http://forum.xda-developers.com/showthread.php?t=1156605
Thursday, August 21, 2014
Samsung Galaxy Mini 2 3 3 Gingerbread S5570XXKPF Stock ROM Firmware Update Download
The first update was for Galaxy Fit 2.3.4 GINGERBREAD Firmware. And now the Samsung Galaxy mini update is available for download. The new firmware update now runs on Android 2.3.3 Gingerbread.
The new PDA file is PDA S5570XXKPF and the CSC file is CSC S5570SERKPF. You can flash with same OPS file TASS.OPS by using ODIN multi Downloader.
Detailed info:
PDA file is PDA S5570XXKPF
CSC file is CSC S5570SERKPF
OPS file TASS.OPS
Version: Android 2.3.3 Gingerbread
Build Date: May 07 2011
Released: May 31 2011
You can download it @ Samfirmware.com
or in Samsung Galaxy Mini Firmware list
Installing and flashing using ODIN
The new PDA file is PDA S5570XXKPF and the CSC file is CSC S5570SERKPF. You can flash with same OPS file TASS.OPS by using ODIN multi Downloader.
Detailed info:
PDA file is PDA S5570XXKPF
CSC file is CSC S5570SERKPF
OPS file TASS.OPS
Version: Android 2.3.3 Gingerbread
Build Date: May 07 2011
Released: May 31 2011
You can download it @ Samfirmware.com
or in Samsung Galaxy Mini Firmware list
Installing and flashing using ODIN
Tuesday, August 12, 2014
Samsung Galaxy S2 I9100XWKI4 I9100ATOKI1 ATO Austria Firmware Update Released
The Android 2.3.4 Gingerbread with build number I9100XWKI4 hits also in Austria this time it has a CSC file I9100ATOKI1 which is built for Austrian version of Samsung Galaxy S2. The build date is September 17, 2011. This is also same of rolling the Android 2.3.3 Official updates over Europe Nordic countries.
There are also an official release for Czech, Lithuania and Norway that is same as XWKI4 but gets the specific CSC file for each region.
Samsung Galaxy S2 ATO- Austria I9100XWKI4
Product Code: GT-I9100LKAATO
HIDSVER: I9100XWKI4/I9100ATOKI1/I9100XXKI1/I9100XWKI4
Build Date: September 17, 2011
Version Android 2.3.4 Gingerbread
This firmware has been reportedly finally fixes the Wifi issue from previous Samsung Galaxy S2 firmware update. So, just try it out and flash it at your own risk, you can grab the Stock ROM from the link below, and just send some feedbacks about this new firmware releases.
Download link of the Original Stock ROM from Intratech link.
Austrian (ATO) version: http://www.multiupload.com/6R69F500FQ
Password: Intratech@XDA
There are also an official release for Czech, Lithuania and Norway that is same as XWKI4 but gets the specific CSC file for each region.
Samsung Galaxy S2 ATO- Austria I9100XWKI4
Product Code: GT-I9100LKAATO
HIDSVER: I9100XWKI4/I9100ATOKI1/I9100XXKI1/I9100XWKI4
Build Date: September 17, 2011
Version Android 2.3.4 Gingerbread
This firmware has been reportedly finally fixes the Wifi issue from previous Samsung Galaxy S2 firmware update. So, just try it out and flash it at your own risk, you can grab the Stock ROM from the link below, and just send some feedbacks about this new firmware releases.
Download link of the Original Stock ROM from Intratech link.
Austrian (ATO) version: http://www.multiupload.com/6R69F500FQ
Password: Intratech@XDA
Tuesday, July 8, 2014
Samsung Galaxy S4 Getting Software Update
Flagship smartphone Samsung Galaxy S4 rumored by PhoneArena get an update that brings several improvements, such as the option to move applications to the micro SD card so that users have more space in the internal memory of the phone. Also corrected about the purple screen issue is also fixed.
The latest update is only available in Germany for 600 Snapdragon version, but other countries and the Exynos version will soon follow. Here are some changes regarding new things in Samsung champ mobile software update is:
- New camera firmware with HDR video
- Remove purplish effect when scrolling
- Toggle to Smart Pause
- Option to move apps to the SD card
- Semi-transparent status bar
- New icons in the menu settings
- Regarding the status of the boot in About Phone
- Increasing the level of the screen legibilitas
Tuesday, June 17, 2014
How to Install rooted 2 3 3 Gingerbread update on HTC EVO 4G
Will updating my HTC EVO 4G with the OTA while Rooted ruin my phone? Will I be able to keep my root status?
If you really want to update to Gingerbread 2.3.3 Gingerbread update but confused and do not want to lose the rooted status of your device, this simple procedure will help you out those confusion. Xhausts from XDA had already cooked the OTA Android 2.3.3 update and its already rooted.
These ROMS are based from original stock ROM update and has been modified and called ROOTED Odexed & De-Odexed ROMS.
All you need to do is grab a copy of below ROMS and flash it through Recovery.
Stock Update
Stock ROM with SU Fix - No Wipe Needed If Coming From A Stock Sense ROM:
4.22.651.2 Rooted & Odexed - updated 06/05/11
4.22.651.2 Rooted & De-Odexed - updated 06/05/11
Firmware:
Must be flashed through hBoot/Fastboot! Not Recovery.
PC36IMG - Radio, WiMAX and PRI Updates (MD5: 2E5C63EA59891A69F6D55C257CF165D5)
View and read the original thread for further instruction.
If you really want to update to Gingerbread 2.3.3 Gingerbread update but confused and do not want to lose the rooted status of your device, this simple procedure will help you out those confusion. Xhausts from XDA had already cooked the OTA Android 2.3.3 update and its already rooted.
These ROMS are based from original stock ROM update and has been modified and called ROOTED Odexed & De-Odexed ROMS.
Stock Update
Stock ROM with SU Fix - No Wipe Needed If Coming From A Stock Sense ROM:
4.22.651.2 Rooted & Odexed - updated 06/05/11
4.22.651.2 Rooted & De-Odexed - updated 06/05/11
Firmware:
Must be flashed through hBoot/Fastboot! Not Recovery.
PC36IMG - Radio, WiMAX and PRI Updates (MD5: 2E5C63EA59891A69F6D55C257CF165D5)
View and read the original thread for further instruction.
Sunday, June 1, 2014
S5670JPKQ7 Arabic Android 2 3 4 Gingerbread Firmware Update for Samsung Galaxy Fit S5670
Heres the Android 2.3.4 Gingerbread Arabic version for Samsung Galaxy Fit GT-S5670, the firmware build number is S5670JPKQ7 with CSC file S5670OJPKQ4. The build date is September 18, 2011, we cannot confirmed yet if this is officially released by Samsung or just a leaked version. If youre in Arabic regions you may confirm if by checking out KIES server. We know its been a while that the Android 2.3.4 for Arabic Regions is farther more delayed while the other regions in Europe and Asia already got the firmware update since July and August. So here it comes, you can try it by yourself.
build info
The S5670JPKQ7 Android 2.3.4 Gingerbread Arabic version stock ROM is available now online on sammobile. The password is "samfimware.com". You can manually install it on Samsung Galaxy Fit using an Odin Downloader tool. We will try to make a tutorial for it after we can confirm that this said update version is official release over Arabic region.
build info
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.JPKQ7
ro.build.version.incremental=JPKQ7
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=Sun Sep 18 18:32:23 KST 2011
ro.build.date.utc=1316338343
ro.build.type=user
ro.build.user=root
ro.build.host=DELL127
ro.build.tags=release-keys
ro.product.brand=samsung
ro.product.model=GT-S5670
ro.product.name=GT-S5670
ro.product.device=GT-S5670
ro.product.board=GT-S5670
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-S5670
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=ar
ro.product.locale.region=AE
ro.wifi.channels=
ro.board.platform=msm7k
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-S5670-user 2.3.4 GINGERBREAD JPKQ7 release-keys
ro.build.fingerprint=samsung/GT-S5670/GT-S5670:2.3.4/GINGERBREAD/JPKQ7:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5670JPKQ7
ro.build.hidden_ver=S5670JPKQ7
ro.build.changelist=577623
ro.build.buildtag=
# end build properties
The S5670JPKQ7 Android 2.3.4 Gingerbread Arabic version stock ROM is available now online on sammobile. The password is "samfimware.com". You can manually install it on Samsung Galaxy Fit using an Odin Downloader tool. We will try to make a tutorial for it after we can confirm that this said update version is official release over Arabic region.
Saturday, May 31, 2014
How to Update Sony Ericsson Xperia ARC New Firmware 4 0 A 2 368 Global Generic Flash Version
Heres the step by step procedure on how to flash and made for people who do NOT wish to no longer wait for PC Companion update stock in there countries, so people can get the upgrade earlier without waiting no longer to upgrade their Xperia Arc the latest 4.0.A.2.368 Global Generic firmware.
Xperia™ arc software updates
08-01-2011
New software available ( Now available on PC companion. For few countries its still rolling out At the moment)
THIS IS 2.3.3. NOT 2.3.4 .
_____________________________________________
THIS IS AN ENHANCEMENT THAT SONY ERICSSON IS CURRENTLY RELEASING FOR ALL XPERIA FAMILY DEVICES.
What you will get is:
Updated: It seems this firmware makes the Booting Much much quicker. I cant say if its true but anyone else can confirm this besides me. thanks
Updated: I currently will be in vacation for 6 days. This thread will be Updated by my Brother. Thanks guys I appreciate your thumbs up
Some improvements to this upgrade:
Theme support, available under Display settings or with a long-press option on the home screen. Still limited to a handful of SE themes but if you always wanted less blue in the menus its now an option.
The Gingerbread CRT-off animation makes its first appearance!
The widget overview accessed with a pinch on the home screen now has the widgets floating about. Shaking the phone sends them flying. Pretty and smooth animation but it makes the overview practically unusable IMO, Ill tap SE about this.
Several ring tones have disappeared, among others the one I were using (Digital Phone). Not a big issue.
Im finally able to set a silent alarm! Previous firmwares allowed setting the alarm sound to None in the list but always defaulted back to the last set sound anyway. This is now fixed.
Setting the alarm time now entails spinning dials instead of clicking. Faster but less precise.
Various UI text is now smaller and sharper.
Additional bloatware, of which some can be uninstalled without root.
Connected Devices, a more intuitive and cleaner version of the DLNA media server software.
The address book looks a bit different, I think. Unfortunately its still impossible to change the sorting order of contacts.
The photo album offers a few more options when you call up the menu.
Digital zoom available at all camera resolutions. Only for images though, not video.
Compression levels of still pictures remain overly high.
xLOUD option to significantly enhance audio output strength from the rear speaker. Almost painfully loud IMO.
Using the HDMI mirroring feature now forces the home screen into landscape mode for a better fit with widescreen TVs.
There is also the Keyboard option for International (full keyboard or Phonepad !)
Minor updates:
Video Editor
Data Monitor
Contact Widget
Timescale extension search
Friends & Music
Setup screen has been changed
Nice Update Center
Etc.
They introduced
New weather widget
New layouts for background theme management
New Xloud benefits
Etc
REQUIREMENTS:Gingerbread 2.3.3
Flashtool.
reminder: XLOUD Can be disable on Sound settings.
Generic Global:
flash version:
Link: http://www.megaupload.com/?d=CFS4HQ16
Link: http://www.mediafire.com/?lgbljmvuw2ggwd0
Heres BluechipJ Guide Video Walkthrough/Comparison: watch this on youtube to get full detailed instructions and other additional information.
All credit goes to Mobage & jlmcr87 .
Original Thread http://forum.xda-developers.com/show....php?t=1196322 for the link
and dyjin for the guides here: http://forum.xda-developers.com/showthread.php?t=1199597
Xperia™ arc software updates
08-01-2011
New software available ( Now available on PC companion. For few countries its still rolling out At the moment)
THIS IS 2.3.3. NOT 2.3.4 .
_____________________________________________
THIS IS AN ENHANCEMENT THAT SONY ERICSSON IS CURRENTLY RELEASING FOR ALL XPERIA FAMILY DEVICES.
What you will get is:
Updated: It seems this firmware makes the Booting Much much quicker. I cant say if its true but anyone else can confirm this besides me. thanks
Updated: I currently will be in vacation for 6 days. This thread will be Updated by my Brother. Thanks guys I appreciate your thumbs up
Some improvements to this upgrade:
Theme support, available under Display settings or with a long-press option on the home screen. Still limited to a handful of SE themes but if you always wanted less blue in the menus its now an option.
The Gingerbread CRT-off animation makes its first appearance!
The widget overview accessed with a pinch on the home screen now has the widgets floating about. Shaking the phone sends them flying. Pretty and smooth animation but it makes the overview practically unusable IMO, Ill tap SE about this.
Several ring tones have disappeared, among others the one I were using (Digital Phone). Not a big issue.
Im finally able to set a silent alarm! Previous firmwares allowed setting the alarm sound to None in the list but always defaulted back to the last set sound anyway. This is now fixed.
Setting the alarm time now entails spinning dials instead of clicking. Faster but less precise.
Various UI text is now smaller and sharper.
Additional bloatware, of which some can be uninstalled without root.
Connected Devices, a more intuitive and cleaner version of the DLNA media server software.
The address book looks a bit different, I think. Unfortunately its still impossible to change the sorting order of contacts.
The photo album offers a few more options when you call up the menu.
Digital zoom available at all camera resolutions. Only for images though, not video.
Compression levels of still pictures remain overly high.
xLOUD option to significantly enhance audio output strength from the rear speaker. Almost painfully loud IMO.
Using the HDMI mirroring feature now forces the home screen into landscape mode for a better fit with widescreen TVs.
There is also the Keyboard option for International (full keyboard or Phonepad !)
Minor updates:
Video Editor
Data Monitor
Contact Widget
Timescale extension search
Friends & Music
Setup screen has been changed
Nice Update Center
Etc.
They introduced
New weather widget
New layouts for background theme management
New Xloud benefits
Etc
REQUIREMENTS:Gingerbread 2.3.3
Flashtool.
reminder: XLOUD Can be disable on Sound settings.
Generic Global:
flash version:
Link: http://www.megaupload.com/?d=CFS4HQ16
Link: http://www.mediafire.com/?lgbljmvuw2ggwd0
Heres BluechipJ Guide Video Walkthrough/Comparison: watch this on youtube to get full detailed instructions and other additional information.
All credit goes to Mobage & jlmcr87 .
Original Thread http://forum.xda-developers.com/show....php?t=1196322 for the link
and dyjin for the guides here: http://forum.xda-developers.com/showthread.php?t=1199597
Tuesday, May 27, 2014
Samsung Galaxy Mini S5570XXKPK Android 2 3 4 Gingerbread Firmware Official KIES Update Stock ROM
Heres the Android 2.3.4 Gingerbread Stock ROM for Samsung Galaxy Mini S5570 with build number S5570XXKPK with CSC_SERKPK and build July 21st 2011. This is an update firmware for Europe version of Galaxy Mini and recently officially released from Samsung KIES server over Russia users.
(from SamKies Updates tweets)
If you want to try it out on your Galaxy Mini and see what features and improvements or bug fixes that has it might be, you can grab a copy of it at samfirmware.com, for they have managed to ripped it and packed as stock and can be flash by using ODIN.
All the latest firmware updates for Galaxy Mini are all listed here: Samsung Galaxy Mini S5570 Stock ROMs
Heres a guide on how to manually flash it via ODIN multi-downloader tool.
1) Download the file from the above page including the OPS file and ODIN downloader tool.
2) Extract to a folder using the password provided by samfirmware.com. Dont rename it or extract again.
3) Run ODIN multi downloader, and load up the TASS.OPS file for your phone.
4) Select "One file package" from ODIN and in look way down, theres the one package selector, click it and browse to the S5570XXKPK_S5570XXKPK_S5570SERKPK_HOME.Tar file you got earlier, and click it.
5) Connect your Phone to PC in "Download" Mode (By turning off the phone, clicking the Power Button + Home button + Volume down button).
6) Once all set and everything is in place, click "START" button and it should take no longer than 3-5 minutes and youre done
7) When the flashing successfully completes, the phone will restart and may take a while to start up, this is normal. Then go to settings, change the default language which is in Russian to your Region.
8) Boot into recovery mode, clear the cache partition. To have a clean and fresh firmware installed.
Thats it! and your done, enjoy..
(from SamKies Updates tweets)
If you want to try it out on your Galaxy Mini and see what features and improvements or bug fixes that has it might be, you can grab a copy of it at samfirmware.com, for they have managed to ripped it and packed as stock and can be flash by using ODIN.
All the latest firmware updates for Galaxy Mini are all listed here: Samsung Galaxy Mini S5570 Stock ROMs
Heres a guide on how to manually flash it via ODIN multi-downloader tool.
1) Download the file from the above page including the OPS file and ODIN downloader tool.
2) Extract to a folder using the password provided by samfirmware.com. Dont rename it or extract again.
3) Run ODIN multi downloader, and load up the TASS.OPS file for your phone.
4) Select "One file package" from ODIN and in look way down, theres the one package selector, click it and browse to the S5570XXKPK_S5570XXKPK_S5570SERKPK_HOME.Tar file you got earlier, and click it.
6) Once all set and everything is in place, click "START" button and it should take no longer than 3-5 minutes and youre done
7) When the flashing successfully completes, the phone will restart and may take a while to start up, this is normal. Then go to settings, change the default language which is in Russian to your Region.
8) Boot into recovery mode, clear the cache partition. To have a clean and fresh firmware installed.
Thats it! and your done, enjoy..
Wednesday, May 14, 2014
ODIN Guide How to Update Upgrade Samsung Galaxy Tab Wifi P1010 to Android 2 3 6 Gingerbread XXKPG Firmware
Heres the step by step guide on how to manually upgrade your Samsung Galaxy Tab Wifi Only GT-P1010 to Android 2.3.6 Gingerbread build by way of using Odin multi-downloader tool and the Android 2.3.6 stock ROM P1010XXKPG with P1010XEUKPG CSC file. These procedures are way too little bit risky for beginners for it will run into a different stages in flashing and if you ever mess up, you are going to brick your device in no time which you find it enough hardly to recover.
As we know tweaking the Galaxy Tablets firmware is a little bit too risky compare to the typical Android Phones. So these procedure might will help you out to figure out on how to tweak your P1010 Wifi Tablet that only runs on 2.2.1 Froyo and if you want to dress it up into something perhaps a new look and a Gingerbread experience as well.
Disclaimer: Droidangel shall not be held responsible if something happens to your device for using these guides. Just proceed at your own risk.
Manual installation using P1010XXKPG stock ROM to upgrade Samsung Galaxy Tab Wifi Only GT-P1010 to Gingerbread.
- To make your flashing goes smoothly you firstly need to have your device installed with P1010 Clockwork MOD recovery on it.. Big thanks to Skin1980 for getting us out to worry about bricking our Galaxy P1010 Tablets again. Install that CWM to get rid of brick.
- Back up all of important files or data stored from your device. You can perform a nandroid back up after you mount the CWM on it.
- Perform wiped data and cache from recovery.
- Make sure that the battery is fully charge or at least above 50%.
- Use PC/laptop runs on Windows XP or later OS.
- Install Kies on your PC to have the needed driver for your P1010 Tabs.
- A supplied USB cable for your Tab.
Grab the needed files:
- Stock ROM P1010XXKPG_P1010XEUKPG
- The Pit File P1wifi_20110128_r10_00.pit
- Odin downloader tool Odin3 v1.85.
1. Extract the downloaded P1010XXKPG stock ROM
2. Run Odin on your PC desktop.
- Tick the PIT button and select the P1wifi_20110128_r10_00.pit file
- Then the PDA button and load the P1010XXKPG_P1010XEUKPG_HOME.tar.md5
DO NOT CHECK THE RE-PARTITION checkbox. Only the Auto-Reboot and F.Reset Time got on it.
3. Prepare your Galaxy Tab P1010 into download mode and then connect to PC.
- Turn Off your tablet or Remove the battery for a while then put it back again. Press and hold the POWER and VOLUME Down buttons while the phone is OFF.
- Then connect the device to PC when it displays a triangle with an Android robot digging with a shovel and word says "Downloading - do not turn off Target", Odin will indicate a word added on the log screen and the ID:COM box will turn to yellow color.
4. Hit the Start button to begin flashing.
DO NOT TOUCH the tablet while flashing still in progress, let the flashing completely finishes. It only takes just around 4 to 5 minutes - depends of your PC speed. A word "PASS" will display in ODIN once it
successfully completes. And then after it reboots you will then have the Android 2.3.6 Gingerbread firmware upgrade on your Galaxy Tab P1010
Heres another detailed guide prepared by taney at XDA-developer.
if you are still struggling to get that Gingerbread upgrade on your P1010 WiFI Tablet.
As we know tweaking the Galaxy Tablets firmware is a little bit too risky compare to the typical Android Phones. So these procedure might will help you out to figure out on how to tweak your P1010 Wifi Tablet that only runs on 2.2.1 Froyo and if you want to dress it up into something perhaps a new look and a Gingerbread experience as well.
Disclaimer: Droidangel shall not be held responsible if something happens to your device for using these guides. Just proceed at your own risk.
Manual installation using P1010XXKPG stock ROM to upgrade Samsung Galaxy Tab Wifi Only GT-P1010 to Gingerbread.
- To make your flashing goes smoothly you firstly need to have your device installed with P1010 Clockwork MOD recovery on it.. Big thanks to Skin1980 for getting us out to worry about bricking our Galaxy P1010 Tablets again. Install that CWM to get rid of brick.
- Back up all of important files or data stored from your device. You can perform a nandroid back up after you mount the CWM on it.
- Perform wiped data and cache from recovery.
- Make sure that the battery is fully charge or at least above 50%.
- Use PC/laptop runs on Windows XP or later OS.
- Install Kies on your PC to have the needed driver for your P1010 Tabs.
- A supplied USB cable for your Tab.
Grab the needed files:
- Stock ROM P1010XXKPG_P1010XEUKPG
- The Pit File P1wifi_20110128_r10_00.pit
- Odin downloader tool Odin3 v1.85.
1. Extract the downloaded P1010XXKPG stock ROM
2. Run Odin on your PC desktop.
- Tick the PIT button and select the P1wifi_20110128_r10_00.pit file
- Then the PDA button and load the P1010XXKPG_P1010XEUKPG_HOME.tar.md5
DO NOT CHECK THE RE-PARTITION checkbox. Only the Auto-Reboot and F.Reset Time got on it.
3. Prepare your Galaxy Tab P1010 into download mode and then connect to PC.
- Turn Off your tablet or Remove the battery for a while then put it back again. Press and hold the POWER and VOLUME Down buttons while the phone is OFF.
- Then connect the device to PC when it displays a triangle with an Android robot digging with a shovel and word says "Downloading - do not turn off Target", Odin will indicate a word added on the log screen and the ID:COM box will turn to yellow color.
4. Hit the Start button to begin flashing.
DO NOT TOUCH the tablet while flashing still in progress, let the flashing completely finishes. It only takes just around 4 to 5 minutes - depends of your PC speed. A word "PASS" will display in ODIN once it
successfully completes. And then after it reboots you will then have the Android 2.3.6 Gingerbread firmware upgrade on your Galaxy Tab P1010
if you are still struggling to get that Gingerbread upgrade on your P1010 WiFI Tablet.
Tuesday, May 13, 2014
I9000NEJVK Samsung Galaxy S Firmware Update Android 2 3 5 Gingerbread for Tre 3 Network
Samsung released the Android 2.3.5 Gingerbread for Hutchison 3G/Tre/3 branded Gingerbread ROMs for Samsung Galaxy S I9000, this was available over in Kies test mode server and beleive to be released officially soon. The firmware build number is for I9000NEJVK with default 3 network for each corresponding regions. CSC DRE -Austria, .HUI - Italy and H3G - UK.
SWYPE support languages: English- UK & US , Czech, Dutch, French, German, Greek , Hungarian, Italian, Polish, Portuguese, Slovak Spanish, Turkish and Korean
Heres the build info.
SWYPE support languages: English- UK & US , Czech, Dutch, French, German, Greek , Hungarian, Italian, Polish, Portuguese, Slovak Spanish, Turkish and Korean
Heres the build info.
Monday, May 12, 2014
Samsung Galaxy SL I9003 XXKP7 Android 2 3 4 Gingerbread ODIN Stock ROM Firmware Update Online!
Yes folks! the Samsung Galaxy SL I9003 Android 2.3.4 Gingerbread I9003XXKP7 is out now and available for download at samfirmware.com.
This update firmware version is labeled with a build date of June 12 2011.
We do not know yet if these said ROM is stable or just a Beta test.
This is for European Version of Samsung Galaxy SL i9003 Android Mobile Phone.
Region: Austria, Benelux, France, Germany, Hungary, Italy, Spain, UK
Available languages: de, en, es, fr, hu, it, nl, pt(cs, da, el, fi, no, pl, sl, sv, tr),
If you want to try it out and choose to take the risk, you can grab a copy of this latest stock ROM for Samsung Galaxy SL I9003 on the link below.
Link: http://goo.gl/IlGmn
password: samfirmware.com
Weve tried flashing the ROM but it seems like there is functionality issues so far, one of these is the sleep mode problem, music player, ringtone, call history message or missed call. Weve revert back again to 2.2 froyo and wait for another stable Gingerbread update.
Update: Another 2.3.4 Gingerbread update leaked is available, labeled with I9003 XXKP9.
This update firmware version is labeled with a build date of June 12 2011.
We do not know yet if these said ROM is stable or just a Beta test.
This is for European Version of Samsung Galaxy SL i9003 Android Mobile Phone.
Region: Austria, Benelux, France, Germany, Hungary, Italy, Spain, UK
Available languages: de, en, es, fr, hu, it, nl, pt(cs, da, el, fi, no, pl, sl, sv, tr),
If you want to try it out and choose to take the risk, you can grab a copy of this latest stock ROM for Samsung Galaxy SL I9003 on the link below.
Link: http://goo.gl/IlGmn
password: samfirmware.com
Weve tried flashing the ROM but it seems like there is functionality issues so far, one of these is the sleep mode problem, music player, ringtone, call history message or missed call. Weve revert back again to 2.2 froyo and wait for another stable Gingerbread update.
Update: Another 2.3.4 Gingerbread update leaked is available, labeled with I9003 XXKP9.
Saturday, May 10, 2014
How to Update Upgrade Root Samsung Epic 4G to 2 3 3 Gingerbread EF02 EF10
Heres a step by step guide on how to upgrade the Samsung Epic 4G to Android 2.3.3 Gingerbread with D700EF02 firmware version by a way of using ODIN. I also included how to root the phone after the upgrade process, just unless anybody who wanted to.
This is only a brief instruction so just read carefully.. This is 99% safe and nothing to worry.
Before you may proceed.. Dont forget to back up all of your important data stored or installed on the device.
Now, first grab a copy of the firmware
You can grab a copy of it here.
This version is D700EF02 and was build June 02 2011.
password is: samfirmware.com
download mirror:
ODIN v1.81 Downloader Tool (also included in the firmware packaged)
Samsung Epic 4g 2.3.3 Gingerbread Flashing procedure using ODIN
1) Extract the download firmware packaged.
2) Run ODIN downloader tool. On ODIN click the PIT button and then load the pit file victory_8G_100528.pit on it. Next, click the PDA button then load the
SPH-D700-EF02-8Gb-REL.tar.md5 file.
CHECK Re-partition and AUTO REBOOT, only the F.RESET TIME remain un-checked.
3)Reboot your Samsung Epic 4G to download mode:
-Turn your Epic 4G off
-While the phone is off, hold down the “1″ key on the QWERTY keyboard while holding the “Power” button. Now you will boot into Download mode
Then connect the phone to PC USB.
4) Once all set, hit the "START" button to begin downloading the firmware.
5) Wait until the whole process completes and then the phone reboot. Then un-plug it from PC.
Thats it.. You will get an OTA MODEM update to EF10 by then.
Heres how to ROOT your Samsung Epic 4G that now runs on 2.3.3 Gingerbread.
Proceed with precautions: ROOTING your device may void its warranty.
Grab a copy of these files for rooting your phone:
CWM 3.1..0 recovery
Working SU, you need this flashable tar.
1) Rename the downloaded CWM recovery file by removing the .MD5 file extension on it.
2) Run ODIN multi-downloader program on your desktop.
Uncheck the RE-PARTITION and F.RESET TIME checkboxes, only leave the AUTO REBOOT checked.
3)Click on the PDA button then select and load the previously renamed CWM recovery file on it. Then hit the "START" button to flash it.
Then wait until it it finishes.Then remove the phone from PC connection.
4) Copy the previously downloaded SU file to the root directory folder of your SD card.
5) Turn your Epic 4G off.
-While the phone is off, hold down the “Volume Down” button, “Camera” button, and “Power” button and hold them.
- Now you will boot in Recovery Mode which allows you four options:
* reboot system now
* apply sdcard:update.zip
* wipe data/factory reset
* wipe cache partition
- Select apply sdcard:update.zip then locate the SU files on the root directory of the SD card.
-Then select "INSTALL".
Done... Your Samsung Epic 4G mobile phone is now rooted.
This is only a brief instruction so just read carefully.. This is 99% safe and nothing to worry.
Before you may proceed.. Dont forget to back up all of your important data stored or installed on the device.
Now, first grab a copy of the firmware
You can grab a copy of it here.
This version is D700EF02 and was build June 02 2011.
password is: samfirmware.com
download mirror:
ODIN v1.81 Downloader Tool (also included in the firmware packaged)
Samsung Epic 4g 2.3.3 Gingerbread Flashing procedure using ODIN
1) Extract the download firmware packaged.
2) Run ODIN downloader tool. On ODIN click the PIT button and then load the pit file victory_8G_100528.pit on it. Next, click the PDA button then load the
SPH-D700-EF02-8Gb-REL.tar.md5 file.
CHECK Re-partition and AUTO REBOOT, only the F.RESET TIME remain un-checked.
-Turn your Epic 4G off
-While the phone is off, hold down the “1″ key on the QWERTY keyboard while holding the “Power” button. Now you will boot into Download mode
Then connect the phone to PC USB.
4) Once all set, hit the "START" button to begin downloading the firmware.
5) Wait until the whole process completes and then the phone reboot. Then un-plug it from PC.
Thats it.. You will get an OTA MODEM update to EF10 by then.
Heres how to ROOT your Samsung Epic 4G that now runs on 2.3.3 Gingerbread.
Proceed with precautions: ROOTING your device may void its warranty.
Grab a copy of these files for rooting your phone:
CWM 3.1..0 recovery
Working SU, you need this flashable tar.
1) Rename the downloaded CWM recovery file by removing the .MD5 file extension on it.
2) Run ODIN multi-downloader program on your desktop.
Uncheck the RE-PARTITION and F.RESET TIME checkboxes, only leave the AUTO REBOOT checked.
3)Click on the PDA button then select and load the previously renamed CWM recovery file on it. Then hit the "START" button to flash it.
Then wait until it it finishes.Then remove the phone from PC connection.
4) Copy the previously downloaded SU file to the root directory folder of your SD card.
5) Turn your Epic 4G off.
-While the phone is off, hold down the “Volume Down” button, “Camera” button, and “Power” button and hold them.
- Now you will boot in Recovery Mode which allows you four options:
* reboot system now
* apply sdcard:update.zip
* wipe data/factory reset
* wipe cache partition
- Select apply sdcard:update.zip then locate the SU files on the root directory of the SD card.
-Then select "INSTALL".
Done... Your Samsung Epic 4G mobile phone is now rooted.
Samsung Galaxy GIO 5660XXKPA 2 3 3 Gingerbread Stock ROM Firmware Update Download
Good news to all Galaxy Gio users with Europe versions, the 2.3.3 Gingerbread update is now available for download. Samfirmware.com confirmed the latest update is now available for download. After a long time awaiting the last update since March which is 2.2 froyo, now we got finally an update for Gingerbread to our devices. The Russian language is the default of this new update but it can easily change into English and other languages. .
"Today we got our hands a first Galaxy Gio GINGERBREAD Firmware."
This firmware runs on Android 2.3.3
The build date is from June 2.
- PDA S5660XXKPA
- CSC S5660SERKP4
See the update links here on samfirmware.com and download it.
Here is the Flashing procedure using ODIN.
"Today we got our hands a first Galaxy Gio GINGERBREAD Firmware."
This firmware runs on Android 2.3.3
The build date is from June 2.
More information
Samsung Galaxy Gio S5660XXKPA- PDA S5660XXKPA
- CSC S5660SERKP4
See the update links here on samfirmware.com and download it.
Here is the Flashing procedure using ODIN.
Friday, May 9, 2014
Stock ROM Samsung Galaxy S II I9100 I9100XXKG5 and I9100UHKG7 Android 2 3 4 Gingerbread Official Kies Update firmware
Samsung has just released the latest Android 2.3.4 Gingerbread via KIES server for Samsung Galaxy S2 I9100. The said update was firstly released over Poland and Brazil users and the two update packaged were now available for download and can be manually flash via ODIN.
Poland
Added: 2011-08-03 06:33:08
Model: GT-I9100
Product Code: GT-I9100LKAXEO
Modified: 2011-08-02
HIDSWVER: I9100XXKG5/I9100OXAKG5/I9100XXKG5/I9100XXKG5
Filename: GT-I9100_XEO_1_20110802103504.zip.enc2
Brazil
Added: 2011-08-03 07:25:03
Model: GT-I9100
Product Code: GT-I9100LKLTTT
Modified: 2011-07-28
HIDSWVER: I9100UHKG7/I9100UUBKG6/I9100UHKG4/I9100UHKG7
Filename: GT-I9100_TTT_1_20110728115842.zip.enc2
OFFICIAL STOCK ROMS:
Thanks to silverwings2008 for the following links.
Official KG5 XEO POLAND 2.3.4 NON WIPE
http://www.multiupload.com/R9H5A5DOWW
Official KG7 TTT Brazil 2.3.4 NON WIPE
http://www.multiupload.com/F1BHNSAX3L
KERNELS:
Thanks to Intratech for the following links:
Stock XXKG5 Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: intratech@XDA
Stock UHKG7 Kernel: http://www.multiupload.com/NU4TIWYETE
Password: intratech@XDA
Quick guide for manual installation: This is a non wipe packaged, so theres no need to back-up all the files stored from the phone. It will remain intact and will not deleted.
1) Download the firmware and extract. ( You may use the KG5 firmware if you were over Europe regions)
2) Run ODIN downloader tool
3) On ODIN Click the PDA button then load the file named "I9100XXKG5_I9100OXAKG5_I9100XXKG5"
Ticked ONLY the "Auto Reboot" and "F. Reset Time" - DO NOT TICK ANY OTHER BOX
4) Turn off your Samsung Galaxy S, then boot into download mode by pressing and holding (Volume Down+Home+Power) buttons at the same time. Then connect the phone to PC once the phone displays in Downloading mode.
5) Hit the "START" button on ODIN to begin flashing.
Thats it! for more info visit the discussion thread @XDA-developer.
Poland
Added: 2011-08-03 06:33:08
Model: GT-I9100
Product Code: GT-I9100LKAXEO
Modified: 2011-08-02
HIDSWVER: I9100XXKG5/I9100OXAKG5/I9100XXKG5/I9100XXKG5
Filename: GT-I9100_XEO_1_20110802103504.zip.enc2
Brazil
Added: 2011-08-03 07:25:03
Model: GT-I9100
Product Code: GT-I9100LKLTTT
Modified: 2011-07-28
HIDSWVER: I9100UHKG7/I9100UUBKG6/I9100UHKG4/I9100UHKG7
Filename: GT-I9100_TTT_1_20110728115842.zip.enc2
OFFICIAL STOCK ROMS:
Thanks to silverwings2008 for the following links.
Official KG5 XEO POLAND 2.3.4 NON WIPE
http://www.multiupload.com/R9H5A5DOWW
Official KG7 TTT Brazil 2.3.4 NON WIPE
http://www.multiupload.com/F1BHNSAX3L
KERNELS:
Thanks to Intratech for the following links:
Stock XXKG5 Kernel: http://www.multiupload.com/VB3V2ZZ4GW
Password: intratech@XDA
Stock UHKG7 Kernel: http://www.multiupload.com/NU4TIWYETE
Password: intratech@XDA
Quick guide for manual installation: This is a non wipe packaged, so theres no need to back-up all the files stored from the phone. It will remain intact and will not deleted.
1) Download the firmware and extract. ( You may use the KG5 firmware if you were over Europe regions)
2) Run ODIN downloader tool
3) On ODIN Click the PDA button then load the file named "I9100XXKG5_I9100OXAKG5_I9100XXKG5"
Ticked ONLY the "Auto Reboot" and "F. Reset Time" - DO NOT TICK ANY OTHER BOX
4) Turn off your Samsung Galaxy S, then boot into download mode by pressing and holding (Volume Down+Home+Power) buttons at the same time. Then connect the phone to PC once the phone displays in Downloading mode.
5) Hit the "START" button on ODIN to begin flashing.
Thats it! for more info visit the discussion thread @XDA-developer.
Thursday, May 8, 2014
S5660XXKS2 Android 2 3 5 Gingerbread for Samsung Galaxy Gio S5660 Update Firmware
The Android 2.3.5 Gingerbread firmware update for Samsung Galaxy Gio S5660 finally leaks online. SamMobile.com recently announced and released the said firmware update for Galaxy Gio. The firmware build number is S5660XXKS2 with CSC file S5660OXXKS2 with build date as of September 2011.
This is the first Android 2.3.5 Gingerbread firmware update for Galaxy Gio since from the previous released of S5660XXKQG which is 2.3.4. Some changes of this update are fixes and minor improvements and looks identical from 2.3.4.
Test Result and Review
Heres the initial impression of the S5660XXKS2 came out on the basis of Android 2.3. 5 after successfully flash on Galaxy Gio.
1) Visual changes - The appearance is not changed, still the same status bar, the same will, in general, with the same as in previous version.
2) Interface - Here we can already catch a few changes. Effect of the circular paging desktops (that is, you can immediately with the latest desktop on the first pass). This fichu Ive seen only on third-party launcher. For me, this feature has proved very convenient effect when paging vertical lists, Cyanogen mod. as for example in the settings or flipping up or down until it stops, then starts to glow screen in blue (as in Cyanogen mod). Heres a snapshot:
Comes out of sleep as well as on the last Baltic-3 (that is, if the wake-body and immediately pull the slide unlock, it will be 5.7 seconds observed brakes, but if you pull the slide at once, but after a second 3-4, then no brakes .) The interface was visually higher (again due to personal feelings).
3) Performance - 2.3.4. IMHO productivity increased slightly compared with 2.3.4.
Here are pictures:
Tested on a clean firmware
4) Media - In the media of any changes, too: the same gallery, the same music player. The only thing noticed is the fact that the video began to write better.
5) Energy consumption - While can not say anything, because I just installed the firmware.
6) Communications - No wi-fi, no GPS, I have not tested and therefore can not say anything (but there is feedback that the GPS is working properly, and not as typical Baltic-3)
7) Sensors - Compass works. Proximity sensor, with the same situation as in 2.3.4 (Baltic-3)
8) Stable Operation - No lockups, no reboot of all time use is not observed.
Conclusion: The major changes I discovered. Same speed, same performance as in the past 2.3.4. You decide yourself.
Images and review of S5660XXKS2 firmware by vutaluk1995 of 4PDA.ru.
Firmware info:
S5660XXKS2 - (Europe)
OPS: GIO_v1.0.ops
BOOT: APBOOT_S5660XXKS2_CL597529_REV03_user_low_true.tar.md5
PDA: CODE_S5660XXKS2_CL597529_REV03_user_low_true.tar.md5
PHONE: MODEM_S5660XXKS2_CL597529_REV03.tar.md5
CSC: GT-S5660-MULTI-CSC-OXXKS2.tar.md5
Version: Android 2.3.5 Gingerbread
Build date: September 2011
Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom, Russia and
other European languages is also included in this package.
You can grab the Samsung Galaxy Gio Android 2.3.5 Gingerbread S5660XXKS2 stock ROM via SamMobile.com download link.
The Password is - samfirmware.com.
This is the first Android 2.3.5 Gingerbread firmware update for Galaxy Gio since from the previous released of S5660XXKQG which is 2.3.4. Some changes of this update are fixes and minor improvements and looks identical from 2.3.4.
Heres the initial impression of the S5660XXKS2 came out on the basis of Android 2.3. 5 after successfully flash on Galaxy Gio.
1) Visual changes - The appearance is not changed, still the same status bar, the same will, in general, with the same as in previous version.
2) Interface - Here we can already catch a few changes. Effect of the circular paging desktops (that is, you can immediately with the latest desktop on the first pass). This fichu Ive seen only on third-party launcher. For me, this feature has proved very convenient effect when paging vertical lists, Cyanogen mod. as for example in the settings or flipping up or down until it stops, then starts to glow screen in blue (as in Cyanogen mod). Heres a snapshot:
Comes out of sleep as well as on the last Baltic-3 (that is, if the wake-body and immediately pull the slide unlock, it will be 5.7 seconds observed brakes, but if you pull the slide at once, but after a second 3-4, then no brakes .) The interface was visually higher (again due to personal feelings).
3) Performance - 2.3.4. IMHO productivity increased slightly compared with 2.3.4.
Here are pictures:
Tested on a clean firmware
4) Media - In the media of any changes, too: the same gallery, the same music player. The only thing noticed is the fact that the video began to write better.
5) Energy consumption - While can not say anything, because I just installed the firmware.
6) Communications - No wi-fi, no GPS, I have not tested and therefore can not say anything (but there is feedback that the GPS is working properly, and not as typical Baltic-3)
7) Sensors - Compass works. Proximity sensor, with the same situation as in 2.3.4 (Baltic-3)
8) Stable Operation - No lockups, no reboot of all time use is not observed.
Conclusion: The major changes I discovered. Same speed, same performance as in the past 2.3.4. You decide yourself.
Images and review of S5660XXKS2 firmware by vutaluk1995 of 4PDA.ru.
Firmware info:
S5660XXKS2 - (Europe)
OPS: GIO_v1.0.ops
BOOT: APBOOT_S5660XXKS2_CL597529_REV03_user_low_true.tar.md5
PDA: CODE_S5660XXKS2_CL597529_REV03_user_low_true.tar.md5
PHONE: MODEM_S5660XXKS2_CL597529_REV03.tar.md5
CSC: GT-S5660-MULTI-CSC-OXXKS2.tar.md5
Version: Android 2.3.5 Gingerbread
Build date: September 2011
Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom, Russia and
other European languages is also included in this package.
You can grab the Samsung Galaxy Gio Android 2.3.5 Gingerbread S5660XXKS2 stock ROM via SamMobile.com download link.
The Password is - samfirmware.com.
Subscribe to:
Posts (Atom)